Do You Have A Construction Project We Can Help With?

INSPECTION SERVICES

BUILDING

Special Inspection – Are inspections performed by either a state licensed engineer or building inspector that are required by the building code and are not performed by the city or county inspectors.

Residential Inspection – Are inspections performed by a state licensed inspector on residential structures.

Condition Report – Is a report issued after an initial inspection that specifies the current existing conditions of a structure.

Metal Framing Inspection – Is an inspection performed by a state licensed inspector of the metal framing installation.

Wood Framing Inspection – Is an inspection performed by a state licensed inspector of the wood framing installation.

Bolt Torque Inspection – Is an inspection performed by a state licensed inspector of the proper torqueing and installation of bolted structural members.

Roofing Inspection – Is an inspection performed by a state licensed inspector of the roof system components.

Reinforced Masonry Inspection – Is an inspection performed by a state licensed inspector of the reinforced masonry installation.

Post-Tensioning Inspection – Is an inspection performed by a state licensed inspector of the post tension cable installation.

Precast Inspection – Is an inspection performed by a state licensed inspector of the pre-manufactured concrete structures.

Cast-In-Place Inspection – Is an inspection performed by a state licensed inspector of formed in place structures.

Welding Inspection – Is an inspection performed by a state licensed inspector of the welded structural connections.

Shoring and Re-Shoring Verification – Is an inspection performed by a state licensed inspector of the shoring systems used.

Balcony Inspection – Is an inspection performed by a state licensed inspector of the balcony structures.

Building Code Consultation – Is a review of plans and specifications by a state licensed engineer for compliance with building code requirements.

Quality Assurance Inspections – Is an inspection performed by a state licensed inspector to ensure compliance with the plans and specifications.

Plan Review to Code Compliance – Is a review of plans and specifications by a state licensed engineer for compliance with building code requirements.

Expert Witness Testimony – Is a testimony provided by a state licensed engineer as an expert in the field of knowledge for a specific case.

ROOFING

Wind Uplift Calculation – Is the design by a professional engineer of roof system fastening to resist wind uplift pressures.

Complete Roof Analysis – Is a complete roof analysis performed by a state licensed engineer.

Third-Party Oversight – Is an independent analysis of existing roof conditions.

Visual Roof Inspections & Assessments – Is an inspection and analysis of existing roof conditions and issues.

Quality Control Inspections – Is an inspection to verify proper materials and installations.

Forensic Investigation – Is an investigation to determine underlying causes of a failure or a problem.

Expert Witness – Is a testimony provided by a state licensed engineer as an expert in the field of knowledge for a specific case.

Roof Inspection Evaluation Surveys – Is a inspection performed by a roofing technician to evaluate the existing roof conditions.

Recommendations for Corrective Actions – Is a list put together by a professional engineer that specify how to correct a problem area.

Pre-Bid and Pre-Job Conferences – Is a meeting with a professional engineer or his representative prior to construction to formalize a plan of action for completing a project.

Inspection of Work-in-Progress and Completed – Is an inspection performed by a roofing technician at various stages of a roof system construction.

Post-Storm Damage Analysis and Reports – Is an inspection performed by a roofing technician to document existing conditions and damages after a storm event.

Retrofit Mitigation Inspection – Is an inspection performed by a roofing technician to determine steps to perform to comply with roof improvements for wind uplift protection.

Roof Drainage Calculations – Are calculations performed by a professional engineer to determine sizes and number of drains required for a flat roof area.

Special Inspections for Lightweight Concrete Installations – Is an inspection performed by a state licensed inspector or engineer to verify proper LWIC placement and installation.

Insurance Mitigation Inspection – Is an inspection performed by a technician to classify a structure for insurance company discounts for wind protection items.

WHAT WE CAN OFFER

What People Say

“Ms. Jodie Weber provided a quick prompt professional service. I am very happy and quite surprised how thorough and detailed their people have been. It is my intention to use their services exclusively on all my roof work. I encourage all roofers and landlords considering recovery to use this company’s services to save time and most importantly to pass all required roof inspections without redo hassles etc. or lost time. They always answer their phones, no voicemail stuff.”

“Federal is the best testing service in the business!!! Sven and his team are always terrific to work with from engineering services, to scheduling, and to the guys in the field.”

Josh Marfleet • All County Paving

“Federal engineering and testing are a professional engineering and testing firm. The staff are very knowledgeable in the testing and engineering fields. I have used the firm for over 24 years and very satisfied with their exceptional and fast service. I would recommend this firm to handle any of your engineering and testing needs.”